Stromtank
Stromtank High Capacity Power Generators
One of the most important aspects to consider if you want to hear the excellent quality of your audio components is the purity and stability of the grid signal.
S4000 Pro Power Independent Power Source
Time to make the best of what you already own
Stromtank is a high-tech device which will play a central role in hearing the excellent quality of your sound components. Stromtank has been designed to separate your hifi-system completely from the grid to supply clean, undisturbed power to achieve the next level of music quality with your hifi-system.
Most people think that because everything turns on and works, the AC grid is providing an ideal signal. It should be a pure sine wave, with no distortion, no high frequencies harmonics, and stable in frequency and amplitude. Unfortunately, this is mostly not the case. Everyone is connected to the same dirty grid, polluted with DC voltage and frequencies. All interferences manipulate audio and video quality and even the best power conditioners are not able to eliminate all disturbances.
After extensive research on various ways to improve the quality of the network, Stromtank opted for a radically different approach. Their goal is to make you completely independent from the traditional, fluctuating domestic power grid. Regardless of what happens with the electricity, your system is always unaffected. The Stromtank power generator offers you the unique opportunity to provide your system with stable energy, completely disconnected from the electrical grid.
Inverter
The Stromtank is equipped with a high-performance inverter, which supplies a perfect and very precise sine wave. The Stromtank is protected against overloads and short-circuits.
Thanks to the largely over-dimensioned performance level, loads up to three times higher than the Stromtank’s rated power can be faultlessly supplied for short periods of use, thus allowing the load to be started up without any problem.
The perfect addition for your audio-setup
During the recharging process you can listen without any interruption. Even when the Stromtank is connected to the grid, the current pulses are not taken directly from the grid - they are absorbed by the battery. In the AC-connected mode the Stromtank creates a stable AC-supply (amplitude and frequency) and has less interaction between the grid and your audio or AV setup.
With the Stromtank, the quality of premium home theatre equipment is both visually and sonically enhanced.
S5000 High Power Independent Power Source
Upgrade your listening pleasure.
After extensive research on various ways to improve the quality of the network, Stromtank opted for a radically different approach. Their goal is to make you completely independent from the traditional, fluctuating domestic power grid. Regardless of what happens with the electricity, your system is always unaffected. The Stromtank power generator offers you the unique opportunity to provide your system with stable energy, completely disconnected from the electrical grid.
Don’t wait until midnight to get the best sound!
Stromtank is an innovative battery array with state-of-the-art LiFePO4-technology: long cycle life, absolute safe and excellent high temperature achievements. The Stromtank S 5000 HP (high-power) offers top performance of more than 5000 W for the most ambitious setups. It is even possible to use several units for very complex setups to achieve outstanding results.
The perfect addition for your music system
When you switch to the disconnected mode, the Stromtank provides all the perfect clean power for several hours and you system is completely disconnected from the grid. No more fluctuations. No more noise. Just perfect clean power for you system to perform at its best.
When the battery state-of-charge reaches a critical minimum, the Stromtank will automatically recharge from the mains, and you can continue listening without interruption.
S4000 Pro Power
Input AC Parameters ON-grid | ||
Input Voltage – factory set | : | 100 - 120 Vac / 230 - 240 Vac |
Input Frequency range – factory set | : | 45 to 65 Hz |
Input Current Adjusted – factory set | : | 10 Aac |
Transfer Time | : | < 15 ms, on grid to off grid |
Output AC Parameters OFF-grid | ||
Output Voltage – Factory Settings | : | 100-130Vac / 200-245Vac (pure sine wave) |
Output Frequency | : | 50 Hz / 60 Hz +/- 0.05% (crystal controlled) |
Harmonic Distortion | : | < 2% |
Continues Power @25°C | : | 950 VA |
Power 30min. @ 25°C | : | 1500 VA |
Peak Power 3sec. @ 25°C | : | 3.700 VA |
Ø battery operating time / average load 400VA (Cos φ=1) | : | 5 hours |
Maximum Load | : | up to short circuit |
Maximum Asymmetric Load | : | up to P cont. |
Load Detection (standby) | : | 2.5 W |
Cos φ | : | 0.1 – 1 |
Maximum Efficiency | : | 93% (dc/ac conversion mode) |
Consumption Stand-by / on | : | 1.5 W / 8W |
Overload + short-circuit protection | : | automatic disconnecting with 3 restart attempts |
Overheat Protection | : | warning before shut-down with automatic restart |
Operating Temperature | : | 10 °C – 45°C |
Relative Humidity | : | 0 - 85% non-condensing |
Acoustic Level | : | < 29 dB |
Battery power Unit | ||
Battery Type | : | LFP - Lithium Iron Phosphate (LiFePO4) |
Nominal Battery Voltage | : | 24 Vdc |
Nominal Capacity | : | 100 Ah |
Charge Current – Factory Setting | : | 10 Adc |
Working Temperature | : | Output AC Parameters OFF-grid |
BMS – Battery Management System | : | Active Balancing |
Terminal Area | ||
AC Output Receptacles | : | 6 x US Sockets |
: | (3 x Hubbell duplex Hospital spec.grade) | |
: | Or 3 x Schuko Sockets | |
: | (Furutech High performance NCF) | |
AC Output Fuse | : | thermal – magnetic circuit break |
AC Input Connection | : | ICE 320 - C14 (fuse 16/10AT) |
Interface | : | 3 service ports |
Power Switch | : | on/off (“on” = green LED) |
Safety key switch for Shipping | : | key switch “Release/Lock” all functions |
Additional Features | ||
Finish Standard | : | Black Anodized* |
Dimensions | : | 48 x 54 x 59 cm (WxHxD) |
Weight | : | 80 Kg |
Remote Control | : | Optional |
Options | : | * Metallic-black and meteorit front-finish available at additional cost. |
: | Custom Finish upon request |
S5000 High Power
Input AC Parameters ON-grid | ||
Input Voltage – factory set | : | 100 - 120 Vac / 230 - 240 Vac |
Input Frequency range – factory set | : | 45 to 65 Hz |
Input Current Adjusted – factory set | : | 10 Aac |
Transfer Time | : | < 15 ms, on grid to off grid |
Output AC Parameters OFF-grid | ||
Output Voltage – Factory Settings | : | 100-130Vac / 200-245Vac (pure sine wave) |
Output Frequency | : | 50 Hz / 60 Hz +/- 0.05% (crystal controlled) |
Harmonic Distortion | : | < 2% |
Continues Power @25°C | : | 1.500 VA |
Power 30min. @ 25°C | : | 2.400 VA |
Peak Power 3sec. @ 25°C | : | 5.200 VA |
Ø battery operating time / average load 400VA (Cos φ=1) | : | 6 hours |
Maximum Load | : | up to short circuit |
Maximum Asymmetric Load | : | up to p cont. |
Load Detection (standby) | : | 2.5 W |
Cos φ | : | 0.1 – 1 |
Maximum Efficiency | : | 93% (dc/ac conversion mode) |
Consumption Stand-by / on | : | 3 W / 16 W |
Overload + short-circuit protection | : | automatic disconnecting with 3 restart attempts |
Overheat Protection | : | warning before shut-down with automatic restart |
Operating Temperature | : | 10 °C – 45°C |
Relative Humidity | : | 0 - 85% non-condensing |
Acoustic Level | : | < 29 dB |
Battery power Unit | ||
Battery Type | : | LFP - Lithium Iron Phosphate (LiFePO4) |
Nominal Battery Voltage | : | 48 Vdc |
Nominal Capacity | : | 100 Ah |
Charge Current – Factory Setting | : | - |
Working Temperature | : | - |
BMS – Battery Management System | : | 10 Adc |
Working Temperature | : | Output AC Parameters OFF-grid |
BMS – Battery Management System | : | Active Balancing |
BMC – Battery Main Controller | : | Main Controller and Monitor Processor |
CMC – Cell Management Controller | : | Sensing Temperature, Current and Voltage |
Terminal Area | ||
AC Output Receptacles | : | 3x... Hubbell duplex, Hospital Spec. Grade |
OR | : | 4x... Furutech High perf. Schuko sockets |
AC Output Fuse | : | thermal – magnetic circuit break |
AC Input Connection | : | ICE 320 - C14 (fuse 16/10AT) |
Interface | : | 3 service ports |
Power Switch | : | on/off (“on” = green LED) |
Safety key switch for Shipping | : | key switch “Release/Lock” all functions |
Additional Features | ||
Finish Standard | : | meteorit |
Dimensions | : | 48 x 58 x 59 cm (WxHxD) |
Weight | : | 125 kg |
Options | : | * Metallic-black and meteorit front-finish available at additional cost. |
: | Custom Finish upon request |